Read the next two pages to make sure your cabling is correct. Page Straight-Through Vs. To connect to another MDI-X port, use a crossover cable.
Stacking allows for a single point of management for all switches. The chapter covers the basic differences between a switch and hub, basic switching features, such as flow control and Spanning Tree, and a discussion of the more advanced features such as link aggregation and the types of VLANs available on the switch. A switch segments traffic, providing each port its own collision domain.
This is different than a hub where all ports belong to the same collision domain. You can enable or disable flow control for each port on the Express T switch.
Spanning Tree Protocol Spanning Tree helps to prevent any loops within the network topology. For example, link aggregation is useful when making connections between switches or to connect servers to the switch. Page Virtual Lans creating a Layer 2 broadcast domain. The advantage of VLANs is that you can reduce broadcast traffic for the entire switch and increase security, without changing the wiring of your network.
The GARP To install and configure a new switch for management 1 Start Intel Device View. As it discovers devices, the Device Discovery service adds an icon for each device to the Device Tree on the left side of the screen. Page 32 4 Click OK. Losing contact with a device If Intel Device View loses contact with a switch, it replaces the switch icon with the non-responding switch icon, which is red.
For example, you can use the Web Device Manager to configure the switch or individual ports, or to monitor traffic statistics and utilization.
For example, to use the default IP address of the switch, type Click a switch in the stack to view or configure its settings. You can create a maximum of three accounts on the switch. The switch can support up to 24 port-based VLANs. It is important to note whether the devices in your VLAN support This feature can expand bandwidth between switches, you must connect devices on the network, such as another switch or a server. The switch uses this table for forwarding traffic to specific devices, so it does not rely solely on broadcasting traffic to every port for communication.
For example, the switch can send a trap to the trap receiver when it detects a change in port speed. Some of the fields can be updated; others are read-only.
However, when you log out of the Web Device Manager, you are prompted to permanently save the current configuration settings. Local Management provides the same functionality as the Web Device Manager using a text-based interface. The text below the data provides navigation tips. Help text at the bottom of the screen provides information on the selected item. Main Menu Configure Stack Port settings: Configures port speed, enables and disables ports, and displays link status.
Page Stack Settings Stack Settings Contact: The contact person or phone number for the switch, up to 40 characters long. MAC address: The unique hardware address assigned by Intel. View Stack Module A: The type of module installed. This is the maximum time that information from a configuration BPDU is used by the switch before it is discarded. Forward delay: Type a number from 4 to 30 seconds default is 15 seconds. Any existing Configure Stack addresses that the switch has learned remain in the address table.
If the switch sees a MAC address Configure Stack that is not on the secured list, it discards the traffic. The Main Menu switch will drop any traffic when it sees the specified MAC address in Configure Stack either the source address or destination address of the incoming packet. Multicast address: Displays the multicast address you want to filter.
All ports in the Configure Stack aggregated link take on the characteristics of the anchor port. Configure Management Administer user accounts: Use this menu to configure user accounts. Usernames can Configure Management consist of any character and can be up to fifteen characters long. Administer User Accounts You can define three usernames. Under this screen, select Administer User Accounts and press 2 In the Username field, type the username of the account for which you want to change the password.
If you changed the IP Configure Management configuration or login setting, the new settings take effect after Reset and Console Options you select this option.
By default, VLANs are not active on the Express T switch so they must be turned on before you can start configuring them. Page Configure Ieee Page Add An Ieee The Main Menu Page How To Configure The first step is to Determine which devices on your network support tag- create a VLAN on the switch and assign member ports.
Table of Contents. Previous Page. Next Page. All rights reserved. Nor does Intel make any commitment to update the information contained herein.
Crossover Cables Page 5 T Switch included stacking cable to attach the T 50Hz 1. Page French Port 1 Port 2 vous avez l'intention de le monter en armoire. Page Italian Port 1 Port 2 Mod ule fissare i supporti allegati. Page 13 T. The switch matches the highest possible speed of an attached device.
Page 23 You can have a total of three member switches. Power on the control switch. The next two pages discuss the requirements. Do not remove any expressly approved by Intel, you could void your authority to covers. Page Wichtige Sicherheitshinweise Wichtige Sicherheitshinweise 1. Am besten dient ein angefeuchtetes Tuch zur Reinigung. If you ship the product, you must assume the risk of damage or loss in transit. You must use the original container or the equivalent and pay the shipping charge.
Page 32 This warranty does not cover replacement of products damaged by abuse, accident, misuse, neglect, alteration, repair, disaster, improper installation or improper testing.
0コメント