Encore installation kit

Don't be fooled by cheaper alternatives. Most of our competitors are simply overseas manufacturers or private label resellers. All of our blower kits are assembled and tested in the USA Racine, Wisconsin and we make every reasonable effort to source parts, materials and supplies from US based manufacturers and suppliers.

In fact, when you call us at , you can speak with the person who will personally build and test your kit. Please be sure to compare our dimensions with your fireplace's available clearance and dimensions. While we provide instructions with each of our kits, the instructions can be limited due to the sheer number of fireplace manufacturers and fireplace models.

We are always available by phone to assist or answer any questions you may have. Here are some commonly asked questions we receive. If you don't see an answer to your question, feel free to contact us directly or use the Ask an Expert tool below for additional information.

You can also consult our Frequently Asked Questions page for answers to additional questions. Most fireplace manufacturers recommend the use of a specific blower kit in their fireplace. The blower or fan kit recommended by the manufacturer can typically be found in your owner's or service manual.

You can also use our helpful Find Your Blower tool at the top of the page to match your fireplace's brand and model to the correct blower kit. And finally, you can also reference the Does It Fit section in the description of every blower kit we sell, which itemizes the brands and models that each blower kit or replacement blower is compatible with.

If you don't see your brand or model listed, please reach out to us directy by clicking the Ask an Expert button below, and one of our expert staff will reach out to you with assistance.

Velcro, double-side tape and noise reduction padding are included and Aftermarket replacement blower for the Vermont Castings Merrimack and Montpelier wood insert blower assemblies. Dual convection blower motor replacement. Includes high grade ball Customer Login If you are already registered, please log in.

Email Address:. Forgot your password? Create your account and enjoy a new shopping experience. Create A New Account. Shopping Cart:. Find Your Blower. Need to Confirm Fitment? Talk to an Expert We know fireplace blowers. Installation Questions? Let us help. Rating Required Select Rating 1 star worst 2 stars 3 stars average 4 stars 5 stars best.

Review Subject Required. Comments Required. You save. Current Stock:. Included With Purchase Ball bearing blower Mounting brackets, base and installation hardware Noise reduction padding Full range rheostat variable speed controller Automatic thermostat with integrated bracket Heavy duty grounded 3 prong power cord 1 year warranty Installation instructions.

So what's included with our warranty? Accessories are covered When we say we cover everything, we cover everything!

No excess is payable upon a warranty claim You pay no excess, less applicable return shippng fees, if you need to make a claim. General Information. Does it Fit? Installation Notes Contractor installation instructions are provided with the the kit. Assembled in USA Our aftermarket fireplace blower kits are the culmination of years of our own research and development. Ask an Expert Can I install the blower myself? Yes, in most cases installation is a do-it-yourself job and requires little to no tools or experience.

We're available by phone and email to support your installation, and we have a growing library of installation related content and videos available to you. You can find product related installation materials in our document center. All orders are typically processed within 24 hours 1 business day of receiving payment.

Orders are shipped from us same day if placed before our shipping cutoff time Monday - Friday: 1PM, Saturday: No Shipping, Sunday: No Shipping , orders placed after our cutoff time are shipped the next business morning. Courier selection is based on shipping location and delivery times can vary based on courier, service interuptions and location.

Of course! We love our neighbors to the north and wouldn't leave you hanging. All orders are shipped within 1 - 2 business days. Delivery times can vary based on location, customs clearance and international courier Canada Post shipping times. For orders that can be shipped through FedEx, our preferred international courier, all duties and applicable taxes have already been paid! Yes, although FREE shipping does NOT apply and no 2 or 3 day expedited service is available standard unless otherwise requested for and paid by the customer.

We offer a comprehensive 1 year warranty from the date of purchase that covers the entire blower or fan kit, including all accessories and components. Please see our warranty for additional information pertaining to coverage and how to file a claim.

This can be a difficult question to answer given the variables associated with blower noise. While we don't carry an official sone, dB or LP rating on our blowers, the blowers on their own are what we consider very quiet. We use extremely high quality Japanese sealed ball bearings and the construction of our blowers ensures smooth operation. However, noise from air movement, firebox resonation and room environment are all variables to consider.

Remember that fireplace inserts are just metal boxes, so adding a blower that produces a significant amount of air flow, can give the impression that the blower is noiser than it really is. Some fireplace manufactures insulate their fireplaces better than others, which can also impact perceived noise.

The addition of a variable speed controller or rheostat is an excellent way of controlling the RPM speed and air flow of the blower, thereby allowing for an effective method of reducing noise. Customers will often find a speed setting they're comfortable with.

Others will prefer having control of the blower through a convenient wall-mounted variable speed dial. We would encourage you to watch some of our video content to get a better idea for how well the blowers are expected to perform and the noise you can expect from them. Running eNcore CLI. Configuration Options. Trademarks and Disclaimers. Commands and keywords and user-entered text appear in bold font. Document titles, new or emphasized terms, and arguments for which you supply values are in italic font.

Required alternative keywords are grouped in braces and separated by vertical bars. Optional alternative keywords are grouped in brackets and separated by vertical bars. A non-quoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. Terminal sessions and information the system displays appear in courier font.

An exclamation point! Note: Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual. Caution: Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.

Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Regulatory: Provided for additional information and to comply with regulatory and customer requirements. This document seeks to outline the background and usage of the eStreamer eNcore client in order to assist users with installation and execution.

The Cisco Event Streamer i. Historically, the eStreamer SDK has been wrapped with some additional code to create separate Perl applications e. It supports version 6. It was built and tested on CentOS 7, but should work with any Linux distribution that supports the pre-requisites. The software will run on Windows, although, it has not been made production-ready yet. This is a command line interface for eStreamer eNcore. It runs standalone to request data from the FMC eStreamer server and output its data.

The output data format can be:. Note: The encore. Note: If you are installing the CLI version on a device running Splunk, then it is worth noting that Splunk has its own version of Python. The encore. If you encounter this problem, then you will need to create a new user and run eStreamer-eNcore as that user. You should consider running the Splunk add on instead. Alternatively using the python3 version will no longer require the pyUnicodeUS4 complication. To access the python3 branch perform the following git checkout python3.

If you are having problems installing these packages, then you may need to enable the EPEL repository. Connect to the Command Line version of your instance using the pem file. Now you are ready to proceed with the installation.

Azure also has a shortcut to enable a quick command line connection. Warning: Windows is not yet supported for production execution. If, however, you wish to attempt an install for the CLI version, then you will need to run the following commands. Use the following command to copy the file from your local machine to the target device:. Use the following command to securely copy the pkcs12 file to the eNcore CLI installation.

Then, run the encore shell script — you will be guided through any additional configuration:. If there are any missing items, you will be presented with an explanation.

An example explanation is in the following figure. If you run encore. For your first run, run it in the foreground so you can see what is happening. Every two minutes, the screen will update with a note of how many records have been processed. If you wish to change the update frequency, see the monitor. Note: To stop the foreground process, press ctrl-c. The default configuration file is set up to run out of the box. Following is a brief explanation of each setting in case you wish to customize.

This is the FMC host and associated information. If you encounter TLS difficulties and are willing to downgrade, then you can change tlsVersion to 1. Note: Note that downgrading the TLS version is useful for debugging and seeing the software work but it is not a recommended long-term strategy. It is recommended instead to fix the root cause. The monitor is a separate thread that runs monitoring and maintenance tasks.

By default, it runs every two minutes. It will report the number of events received and handled and will check the status of sub-processes. If there have been any problems, the monitor will place the client into an error state and the client will shut itself down. The eStreamer server expects requests to state their chosen start time. There are broadly three options:. First run is from 0. Two examples of outputters are given in the figure below.

Although only one outputter is required — one that sends CEF events to the Sentinel connector, it is often useful to write CEF output to local files. The second outputter shown in the figure below writes the CEF events to local files. Controls whether eNcore client will persist a connection even if the CLI process has been terminated. Controls whether eNcore will run.

The duration in seconds the client will wait for a connection to establish before failing. The duration in seconds the client will wait for a response before timing out. The period in seconds between each execution of monitor tasks.

Default is Lower numbers are useful for debugging but will create more log traffic. True will display the speed at which the client is processing records. A positive value means the client is processing events faster than eStreamer is sending them. Negative is slower. Once up to date, this should hover around zero. True will show the last bookmark timestamp. This is useful to see how far behind the eNcore client is.

True will report the total number of events subscribed. True will report the total number of events written to output. Select the level of logging as per your requirement. It is strongly recommended that you do not use anything above INFO for production environments.

This describes the format of the log and how they are stored. This determines whether log output is also shown in Standard Output.

This specifies the location of the application log. Maximum number of messages buffered before throttling takes place.

It is essentially a buffer size. The larger this number, the longer it will take to shutdown. Default configuration setting is Do not change. While this is an array, eNcore can only currently support one server. The array is to support the future ability to connect to multiple hosts. Default configuration is 1. If you change the host entry after having run eNcore then new cache, bookmark and metadata files will be generated.

The server port to connect to. Default