A Nikon-approved memory card that has been formatted in the camera note that all data on the memory card will be deleted when the card is formatted; before formatting the card, back up any data you wish to keep to a computer or other device. Do not use Microdrive cards. Check the current camera firmware version.
Illustration shows dialog displayed when both A and B firmware have been updated to version 2. Two firmware versions A and B will be displayed. Both should be earlier than 2. Download and extract the new firmware. Mac OS X Version If the firmware update is not automatically extracted, install StuffIt Expander or other compatible archive expansion software and extract the update. Copy the firmware to the memory card. The firmware can be copied to the camera memory card either by connecting the computer directly to the camera using the USB cable, or by removing the memory card from the camera and inserting it in a card reader.
Important Only one of the two sets of firmware A or B can be updated at a time. Use separate memory cards for each set of firmware, or update firmware A as described below, then format the memory card and repeat the process for firmware B. Turn the camera off and insert a formatted memory card.
For information on formatting memory cards, see the camera Guide to Digital Photography. Copy only of the firmware files "A Do not copy both files to the card at the same time. Disconnect the camera from the computer if using an memory card reader then insert the memory card to the camera 6.
Select "Update" and follow the camera's on-screen menus. Do not turn the camera off during upgrade. When a message displays that the upgrade is complete, turn the camera off. Repeat steps 2 - 8 to perform the second firmware update. Re-format the memory card. Turn the camera on again to confirm that A and B firmware has successfully been updated to v2.
For detailed instructions on how to install this firmware update click here. System requirements. Built-in USB port. When performing this firmware upgrade, be sure to upgrade both A and B firmware Correct operation of your camera is not guaranteed if only A or B of the firmware is upgraded without upgrading the other part. Check the current camera firmware version. Illustration shows dialog displayed when both A and B firmware have been updated to version 2.
Two firmware versions A and B will be displayed. Both should be earlier than 2. Download and extract the new firmware. Name the folder as desired. Save the file to the folder created in Step Copy the firmware to the memory card. The firmware can be copied to the camera memory card either by connecting the computer directly to the camera using the USB cable, or by removing the memory card from the camera and inserting it in a card reader.
Important Only one of the two sets of firmware A or B can be updated at a time. Use separate memory cards for each set of firmware, or update firmware A as described below, then format the memory card and repeat the process for firmware B. Turn the camera off and insert a formatted memory card. For information on formatting memory cards, see the camera Guide to Digital Photography.
If Nikon Transfer is installed, it will start automatically; to exit, select Exit from the File menu. If PictureProject is installed, it will start automatically; click Cancel to exit. Click Cancel.
0コメント